You are not limited to meters total from your router to the device you wish to connect. Here are a few different ways you can measure the length of an Ethernet cable, with some being more practical than others:. You will need to have access to the full run of cable in order to measure it accurately as well as having a tape measure that is actually long enough.
Most bulk reels of Ethernet cable will have footage markings on the outside shielding. This is ok if you are only just starting a new reel of cabling as these markings are really only intended on letting you know how much cable remains in the box.
In order to measure the cable, you would need to know the number on either end of the cable and also have confidence that nothing has been spliced along the way.
If you would prefer not to have to make your own Ethernet cable and want the convenience of them being pre-made, the length of the cable will clearly be visible in the product description. Although you get to know the length of the cable straight away, buying pre-made cables can work out to be quite expensive compared to making your own, especially if you need many separate cables at differing lengths.
If you want the easiest solution and the best results, use a network testing tool to measure the length of a run of Ethernet cable. In addition to simply measuring the length of cable, these invaluable tools also have other useful features such as certifying the cable, telling you the speeds across the run and even being able to save the results and export them for record-keeping.
It is possible to extend the reach of Ethernet cable; it just involves a bit of extra equipment. As long as the cable between the router and the switch and the other cable between the switch and your device are both less than meters long each, the router and device will still be able to communicate with each other. If you need to extend an Ethernet connection beyond meters, my suggestion would be to invest in a basic network switch as it will do the job perfectly whilst being pretty inexpensive to buy.
The range of a single Ethernet cable is still meters, regardless of whether it is being run indoors or outside. It is certainly possible to run an Ethernet cable outdoors should you need to connect another building or outhouse to your network.
Go to Shopping List. Recent Posts. Simplifying the Many Differences among Ethernet Cables. Why Custom? Time to Get Organized with Cable Management. November October September May April Traditionally, that limit is listed at meters feet but that number can be lower depending on several factors such as the way the cable is made and the electric fields the cable needs to pass through.
That should be enough in most cases. Solid Signal has a wide selection of BaseFX products that make it easy to connect your wired network over long distances. Fiber is just as easy to work with as regular cable but it does take some special skills and a lot of expensive tools. Using Nanostations makes it easy to connect two buildings over reasonable distances without having to bury wires. If segment runs must exceed twisted-pair cabling specifications, a repeater or switch could be added.
Solid cable, such as Cat5e solidcore cable , is normally used for covering longer network cable distances. The recommended Cat5e cable length is similar to the standards for other twisted-pair cables.
0コメント